Small Square Baler Machine / Mini Square Baler
What is a small square baler?
Small square baler is a kind of baler machine. The specialty of this machine is that the bale of the small square baling machine is small block. After compaction, the bale does not need to be tied with plastic/steel wires or pack with plastic bag. It is already very tight and does not fall apart without the packing material. This small square baler is mainly used in biomass industrial to bale the material like hay, straw, wood shavings, etc.
How to choose the small square baler?
When you are looking for the small square baler, there are some points that you need to pay attention.
-The condition of your material before baling
The initial condition of the material is very important factor when choosing the small square baler. Is the hay/straw in loose condition or in bundles? Are the hay and straw chopped or none-chopped? These factors decided what kinds of small square baler you should choose. So you should be very clear about it when making the decision.
– The density of your material before baling
If you have specific requirement about the density of the baler after baling, you should know the density of the material before baling well. Suppose your raw material is with low density before baling, even we use the same small square baler machine, the density of your material after baling will be much lower than the ones with high initial density before baling. If you want the same high density after baling as the ones with high initial density before baling, you should go for big models with higher pressure. Otherwise, small model will be enough for you.
– The moisture of your material before baling
The moisture of the material before baling will affect the bale weight to some extent. If you have specific requirement about the bale weight, you should take the moisture of the material before baling into consideration. The higher the moisture rate is, the heavier the bale will be. And the moisture also decides whether your material is suitable for using the small square baler to compact. If the moisture is too low or the material is very dry, it might very difficult to make the bale in a complete whole piece. It may fall apart easily after baling due to the low moisture.
Quick links: